Star Micronics RS232 - Manual (Page 6)

– 2 –
2. MEMORY SWITCH AND DIP SWITCH
Functional settings are made using the printer’s EEPROM memory switches and
the DIP switches.
2-1. Memory Switch
Each memory switch is a 16-bit word stored in EEPROM.
The printer is shipped with the factory setting which is made in accordance with
its product type.
For the detailed functions and the settings of the Memory switches, please refer
to “Chapter 8”.
The factory settings are shown in the table below.
Memory switch TSP212 TSP242
#0 0000 0000
#1 0000 0000
#2 0000 0100
#3 0000 0000
#4 0000 0000
2-2. DIP Switch
Be sure to turn off the power of the printer before changing the setting of the
DIP switches.
DIP switch array
8 1 4 1
ON
OFF
DIP switch 1
DIP switch
DIP switch 2
Power off