Sharp Aquos LC 52SE94U - Manual (Page 48)

Vertical mounting
Angular mounting
Setting the TV on the Wall
CAUTION
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U/
LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an
unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-52AG4 or AN-65AG1 bracket to mount the
TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 or AN-65AG1 wall mount bracket.
(See the bracket instructions for details.)
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
About setting the TV angle
0 ࠑ /5 ࠑ /10 ࠑ
• The "A" position is at the
center of the display.
Refer to the operation
manual of AN-65AG1 for
details.
LC-65SE94U
AN-65AG1
0ࠑ/5ࠑ/10ࠑ/15ࠑ/20ࠑ
LC-46SE94U
• The center of the display:
6 3 /
4
inch (174.25 mm)
under the "A" position.
LC-52SE94U
• The center of the display:
5 1 /
4
inch (136.1 mm) under
the "A" position.
• Refer to the operation
manual of AN-52AG4 for
details.
LC-46SE94U
LC-52SE94U
AN-52AG4
46
Appendix