Supra LAUNCH 20 - Manual (Page 46)

— 46
© 2006 Skier’s Choice, Inc.
Rad-A-Cage
If your Supra model has been equipped with an optional RAD-A-CAGE
towing tower, please review this section for details on it’s usage,
maintenance and storage. The cage is designed as a stable tower to
enhance wakeboarding. It is NOT intended to be used to tow skiers,
barefoot skiers, or multiple wakeboarders. Such use will void any
warranties written or implied.
Before use, be sure that all mounting bolts are properly tightened
in place.
Be aware of and avoid low overhead objects such as bridges,
power lines, overhanging trees, etc.
To Lower Cage for Storage
- Remove the four hand knobs from the top of the rear
leg. While holding the tower up, lower the side legs.
Then lower the tower downward into the boat.
To Raise Cage
- Lift the tower and swing up the rear legs. Install the four
hand knobs.
The threads in the aluminum foot could be damaged if
the bolts are not aligned and threaded correctly.
The Rad-A-Cage is designed to pull single (1)
wakeboarder, trick skier, or kneeboarder.
NOTE: Apply a thin coat of anti-seize to the threads of
the hand knobs periodically.