SoleusAir AH1-CC-01 - Manual (Page 6)

CONTROLS & OPERATION
1) Power On and Off - Press the ON/OFF button once on the control panel or remote control to manually
turn the unit on. Press the ON/OFF button once more to turn the unit off.
2) Mode Selection - Press the MODE button to cycle between the different modes: Auto, Turbo, Sleep,
Anion, and Odor.
3) Fan Speed - Use the remote control to change the FAN speed. You can choose between: Mute (ultra-
quiet), Low, and High. In certain modes, the fan will speed will be pre-determined.
4) Timer - To program the unit to automatically turn off, press the TIMER button when the unit is on. You
can select either 1, 2 or 4 hours with the Timer. Each press of the TIMER button changes the shut-off
time. Once the desired time (1, 2 or 4 hours) is over, the unit will automatically shut down. If you decide
not to use the timer, press the TIMER button until none of the timer indicator lights are lit on the control
panel.
5) Clean/Change - When the clean light indicators are lit, one of the filters needs to be cleaned or changed.
The Dedust Filter (Particulate filter) may be cleaned with soapy water.
ODOR
SENSOR
REMOTE
RECEIVER
6
INDICATOR LIGHTS MODE BUTTON ON/OFF BUTTON
AIR QUALITY SENSOR