Sony 4-156-541-83(1) - Manual (Page 34)

34 GB
If the peak level OVER indicator lights
in red when the recording level exceeds
–1 dB, or “
” appears on the
display window, distortion may occur.
Reduce the recording level.
5
Make other settings for recording, such
as “LIMITER” (page 44), “LCF(Low
Cut Filter)” (page 43), etc., in the menu.
6
To start recording, press X PAUSE or
N PLAY/ENTER.
7
To stop recording, press x STOP.
Recording a few seconds in
advance –
the Pre-Recording function
The pre-recording function allows you to
record sound sources for approximately 5
seconds prior to the point when recording is
actually started.
This is useful for recording during
interviews or when making an open-air
recording so that you will not miss an
opportunity to start recording.
Adjust the
maximum level
of the sound to
about –12 dB. OVER indication
x STOP
z REC
N PLAY/
ENTER
MENU
> FF/ v ,
. FR/ V