Siemens XT55 AVL User Manual
Page 32
XT55 AVL User’s Guide
Confidential/Released
s
m
o
b
i
l
e
XT55_avl_ug_V03
Page 32 of 37
28.06.2004
$PSRF111,
value,
*XX
Parameter description:
value:
//configure the download procedure
Defined value
70
//information about the malfunctional tracks
*XX
//CheckSum has to be calculated.
Example:
$PSRF111,7*3D
Response:
ERROR or SUCCESS
$PSRF111,
value,
*XX
Parameter description:
value:
//configure the download procedure
Defined value
8 // performs the test of all GPIO’s
*XX
// CheckSum has to be calculated.
Example:
$PSRF111,8*32
Response:
ERR: malfunction detected or
OK: all GPIOs successfully tested
$PSRF111,
value,
*XX
Parameter description:
value:
//configure the download procedure
Defined value
80 // information about the malfunction of GPIO’s
*XX
// CheckSum has to be calculated.
Example:
$PSRF111,80*02
Response:
Verbose information about malfunctional GPIOs
$PSRF111,
value,
*XX
Parameter description:
value:
//configure the download procedure
Defined value
81 // reports the current state of each read GPIO’s (endless loop)
*XX
// CheckSum has to be calculated
Example:
$PSRF111,81*03
Response:
Current state of each read GPIO (endless loop)
$PSRF111,
value,
*XX
Parameter description:
value:
//configure the download procedure
Defined value
9 // information about the current and voltage of antenna.
*XX
// CheckSum has to be calculated
Example:
$PSRF111,9*33
Response:
Vrf:0x85A Is:0x86C //Hex value of antenna voltage and current of
the XT55 GPS part