SPX Cooling Technologies HP7000 - Manual (Page 4)

4
Fan Blade Installation
Note
Figure 4
Marley HP7000 fan blades are manufactured to equal moment weight
and blade clamps to equal static weight. The blades and clamps can
be installed in any position without affecting fan balance.
At the end of the blade shank on a nameplate is inscribed a let-
ter code (i.e. “A” or “B” etc.). When installing or replacing blades
use only blades with the same letter code.
Figure 3–Blade Nameplate
1–Lubricate the C\v″ bolt and C\v″ hex-nut threads with thread lubricant.
Set the hardware aside.
BLADE SIZE
MOMENT WEIGHT CLASS
SERIAL NUMBER
For Additional Information Refer to HP7000 Manual
SPX Cooling Technologies
Overland Park, KS USA
913 664 7400
www.spxcooling.com
HP7000 Fan