Samsung 9 Series - Manual (Page 12)

English - 0
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER button on the remote control. The message “The Menu
Language, Store Demo, Channels, and Time will be set.” is displayed.
2. Press the ENTERE button, then “Select the OSD Language.” menu is
automatically displayed. Press the ENTERE button.
3. Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTERE button to confirm your choice.
4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTERE button.
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
5. Press the ENTERE button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to
confirm your choice.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select “Start”.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
Press the ENTERE button at any time to interrupt the memorization process.
After all the available channels are stored, the message “Set the Clock Mode.” is displayed.
7. Press the ENTERE button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTERE button.
If you select “Manual”, “Set current date and time” is displayed. (See page 25)
If you have received a digital signal, the time will be set automatically. If not, see page 25 to set the clock.
8. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select
“Setup”, then press the ENTERE button.
2. Press the ENTERE button again to select “Plug & Play”.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-
0-0’.
If you want to change PIN number, refer to 21 page.
The “Plug & Play” feature is only available in the TV mode.
N
N
N
N
N
N
N
N
N
N
N
Channel Control
Storing Channels and channel
Country
Analogue Channel: You can change the country for analogue channels.
Digital Channel: You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit PIN number.
❑


N
Setup
Plug & Play ►
Language : English
Time
Network Selection : Cable
Wireless Network Setup
Cable Network Setup
Child Lock
: On
Change PIN
Channel
Country ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide
: Mini Guide
Channel List
Channel Mode
: Added Ch.
Plug & Play
The Menu Language, Store Demo, Channels, and Time
will be set.
OK
E Enter
BN68-01737M-ENG.indb 10 2008-08-27 ¿АИД 2:52:57