Sunwave Tech. REMOTECOMM SRC-7000 - Manual (Page 24)

SRC-7000 User’s Manual
20
11. Click the inside Edit Label field and name the new key by
using the keyboard or on-screen keyboard.
Note: To add a carriage return (new line) in your key name, use the
enter key on the on-screen keyboard.
12. Press and click to save your
new device.
Your new device key will appear in the LCD soft
window with the new name. When you
download the configuration to your remote
control, it will have the characteristics of the pre-
programmed device you selected.
Your new device will also appear in the device
list in the left panel of the interface and it can
be modified or deleted just like the other
devices in the list.
Note:
• You will need to download the new configuration to the remote
control to make it active. See Chapter 6 Communications on
page 44 for more information.
• You should also save a copy on your hard disk as a backup. To
save the current VMCF file, click the save button and name
it so that you can find it again.
• You can delete a device from the menu tree by right clicking
on it and selecting Delete device from the drop down menu.
Adding a soft button
You can add or delete a button to any of the devices defined,
including those that you have defined yourself.
To add a new soft button:
1. Start the RemoteComm software as described in
Starting the software on page 7.
When the correct VMCF file is loaded, the window below
will be displayed: