Sharp AM-900 - Manual (Page 77)

Selecting Temporary Fax Settings
75
3. Sen
din
g
Fa
x
e
s
Selecting Temporary Fax Settings
You can adjust one or more of the following temporary fax settings before
pressing to begin transmission.
Resolution
The following resolution settings are available for faxing:
To select a resolution setting, press until the desired setting appears in
the display and then press .
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Contrast
Three contrast settings are available for faxing: LIGHT (for dark originals),
NORMAL, and DARK (for faint originals).
To adjust the contrast, press until the desired setting appears in the
display and then press .
STANDARD Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small letters
or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced in
256 shades of gray.
QUALITY
ENTER
CONTRAST
ENTER