Troubleshooting – Samsung DC68-02154A User Manual

Page 11

Advertising
background image

10

WATER SUPPLY CONNECTOR FILTER

1.Pull out the filter and wash well.

2. Pull in the filter and connect

the hose to the inlet water
valve tightly.

inlet water
valve

3. Check if there is a leakage.

Note to tighten up the

connector.

CLEANING THE FILTER NET

Clean the filter net often to keep the washer clean.

1. Push the upper part

of the filter and pull in.

2. Open the cover as

shown in the figure.

3. Clean the filter.

4. Close the cover and insert the

lower part of the filter in the
basket first and then push the
filter with "click" sound .

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise

and pull out the filter.

3. Remove dirts and rotate

the filter clockwise
until it locks in position.

(pump drained washer)
1.
Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and

remove dirts.

4. Reassemble in

reverse order.

open

close

Advertising