Silicon Image SiliconDrive SSD-H16G(I)-3500 - Manual (Page 10)

P HYSICAL S PECIFICATIONS SSD-H XXX (I)-3500 D ATA S HEET
S ILICON S YSTEMS P ROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
3500H-03DSR P AGE 1 F EBRUARY 2, 2009
P
HYSICAL
S
PECIFICATIONS
The SiliconDrive 1.8" Drive products are offered in an industry-standard 1.8"
Drive form factor. See
"Part Numbering" on page 65 for details regarding 1.8"
Drive capacities.
P
HYSICAL
D
IMENSIONS
This section provides diagrams that describe the physical dimensions for the
1.8" Drive.
Figure 1: Physical Dimensions
Table 1: Physical Dimensions
Dimension Millimeters Tolerance (mm) Dimension Millimeters Tolerance (mm)
A 60.00 ±0.25 K 6.90 ±0.125
B 57.05 ±0.25 L 2.82 ±.10
C 3.20 ±0.10 M 57.05 ±0.25
D 69.85 ±0.25 N 2.95 ±0.10
E 66.65 ±0.25 P 5.19 ±0.125
F 2.95 ±0.10 Q 11.57 ±0.125
G 6.55 ±0.125 R 2.00 ±0.10
H 5.25 ±0.125 S 11.71 ±0.125
I 63.85 ±0.25 T 3.00 ±0.10
J .35 ±0.0125