Synapse Films 11009987 - Manual (Page 14)

14
Additional Features
Calendar Function
Press the Calendar key on the remote control and the calendar page will display. Press Setup to adjust
the date, time, press again to set up Sleep Time and again to set up the Wake Time. This will allow for
your SLIDESHOW to begin and end at your preset times.
Press calendar key Set up key The date and time will appear in the screen, use up/down/left/right
key to adjust time and calendar.
Monitor Function
The digital photo frame can be used as a computer monitor. Use a VGA monitor cable (not included) to
connect with the computer host and the VGA input connector located on the side of the digital photo
frame. Once the computer is up and running, press the VGA / DPF button to switch the display to the
computer screen.
USB Connection Host Function
You may connect an MP3 player or other USB mass storage devices or digital cameras with a USB
cable connector located on the side of the unit to USB input jacks. This will allow you to transfer files to
and from these devices. (USB Cable included).
NOTE: Not all digital cameras will support the USB input function, please refer to the owners manual of
your digital camera.
USB Computer Interface
When the photo frame is connected to a computer via the USB cable, , files from the
computer can be transferred and saved to and from the memory cards and USB devices attached to
the photo frame. (USB Cable included)
Audio Out
You may connect your digital photo frame to other audio devices via the Audio Out interface using a
stereo phono connector plug and cable (not included). You may listen to your music and audio files
from your digital photo frame on external stereo speakers.