Sony SLV-469 - Manual (Page 7)

7 Getting Started
Getting Started
Audio/video (A/V) hookup
Page 7
If your TV has audio/video (A/V) input jacks, you will get a better picture
and sound when you hook up your VCR using these connections. If your
TV doesn’t have A/V inputs, see the following pages for antenna or cable
hookups.
If you’re not planning to use your VCR to record programs, you’re finished
setting up the VCR after you’ve made the connections shown on this page.
If you want to record off-air or off your cable TV system, complete these
connections first, and then go to the following pages for antenna or cable
hookups.
A Use this hookup if your TV has stereo jacks
VCR
B Use this hookup if your TV doesn’t have stereo jacks
TV
VCR
TV
Audio/video cable (not supplied)
Audio/video cable (not supplied)
Note
• If you use the Trinitron TV Synchro Play function (see page 27), the A/V connection
is necessary. (If your TV has two or more inputs, connect the audio/video cable to
the VIDEO IN 1 jacks.)
Note to CATV system installer (in USA)
This reminder is provided to call the CATV system installer’s attention to Article 820-
40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
IN
VIDEO
AUDIO
LINE-1 IN
LINE OUT
AUDIO VIDEO
LINE-1 IN
LINE OUT
AUDIO VIDEO
VIDEO
AUDIO
IN