Sony CMT-NEZ7DAB - Manual (Page 18)

18 GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
1
Load a recordable tape.
2
Load a disc you want to record.
When you want to record an album from an
MP3 disc, be sure to press PLAY MODE
repeatedly to select
, then press + or
– to select the desired album before
proceeding.
3
Press CD SYNC on the unit.
“SYNC” and “REC” flash.
The tape deck stands by for recording and
the CD player pause for playback.
4
Press z PAUSE/START on the unit.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press x.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Creating your own
program” (page 12).
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 24).
1
Load a recordable tape.
2
Press FUNCTION repeatedly to select
the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• AUDIO IN: To record from the optional
component connected to the AUDIO IN
jack.
3
Press z PAUSE/START on the unit.
“REC” flashes and the tape deck stands by
for recording.
4
Press z PAUSE/START on the unit,
then start playing the desired source to
record.
Recording starts.
Other operations
Note
You cannot listen to other sources while recording.
Tips
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective aerial to reduce the noise.
• For recording from a CD:
You can press . or > to select tracks during
recording pause mode (after step 3 and before step 4).
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press x.
Pause recording Press z PAUSE/START on
the unit.