Sony WEGA KLV-30HR3 - Manual (Page 26)

27
GB
Other Functions
Sleep Timer
This function allows you to set the TV to switch itself automatically to standby mode after a
specified time period. The following time periods can be selected: 30, 60, 90 and 120 minutes.
To do this:
Press the
button on the remote control repeatedly until the desired time period appears on the
screen.
When the Sleep Timer feature is on, the
(Standby/Sleep) indicator on the TV lights up in red.
To cancel the Sleep Timer feature:
Press the
button on the remote control repeatedly until “Off” appears on the screen.
• If you switch off the TV and switch it on again, the Sleep Timer feature is reset to “Off”.
• Press the
button on the remote control to display the time remaining before the TV
switches to standby mode.
• The message “Sleep Timer will end soon. Power will be turned off.” Appears on the screen
1 minute before the TV switches to the standby mode.
Picture Freeze
This function allows you to freeze the TV picture (e.g. to make a note of a telephone number or
recipe).
To do this:
Press the
button on the remote control to freeze the picture. A window is displayed in the
bottom left of the screen showing the currently selected channel. Press the button again to
remove the window. Press the button again to cancel the Picture Freeze and return to normal
TV mode.
Adjusting the position of the Picture Freeze window
The position of the window displaying the currently selected channel can be adjusted.
To do this
With the TV in Picture Freeze mode, press the
B , b , v or V buttons to adjust the position of the
window on the TV screen.
Other Functions
n
n
n
n