Sanyo ICR-B50 - Manual (Page 18)

17
VOICE ALARM TIMER
1. Press the n button to turn the power on.
2. Select the sub-menu “ALARM” of “FOLDER”. (See “SELECTING THE
MENU MODE”.) “FOLDER ALARM” appears.
3. Press the n button to return to the original display mode.
4. Press the c or d button to select the file number (01/02 or 02/02).
5. Press the m button to record your alarm message.
6. Press the n button to stop.
7. Press the TIME/SET button. “OFF” or “ON” blinks.
8. Press the
c or d button to select “ON”. “ ” or “ ” appears.
9. Press the TIME/SET button. The year display blinks.
10. Set the timer ON time by using the TIME/SET,
c or d button. (Refer
to “Adjusting the date and time”.)
11. Press the MENU button to select the other folder as desired. (See
“SELECTING THE MENU MODE”.)
When the alarm ON time arrives, the voice alarm will be activated as shown
below:
At stop mode:
•
Beep 1 time & Voice message (If voice message is recorded.)
• Beep 10 times (If no voice message is recorded.)
During playback mode:
The operation is the same as “At stop mode” as above. And, it goes back to
the previous point and pauses.
During recording mode:
Beep 1 time (Recording will not be interrupted.)
At power off mode:
•
Beep 1 time & Voice message (If voice message is recorded.)
• Beep 10 times (If no voice message is recorded.)