Sharp XL-ES50 - Manual (Page 21)

21
XL-ES5
XL-ES50
C
D
P
lay
b
a
ck
„ Programmed play
You can choose up to 32 selections for playback in the order you
like.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original program.
Notes:
z Opening the disc compartment automatically cancels the pro-
grammed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
z During the program operation, random play is not possible.
1 While in the stop mode, press one of the 1 - 5 buttons to
select the desired disc.
Selected disc number
2 Press the direct search buttons on the remote control to
select the desired track.
You can also select a track by pressing the or button.
Selected track number
3 Press the MEMORY/SET button to save the track number.
4 Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
5 Press the / button to start playback.
To clear the programmed selections:
Press the CLEAR button while the "MEMO-
RY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.