Recording from connected equipment without a timer – Sony RDR-GXD360 User Manual
Page 54
54
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Regardless of whether or not the programme
is a Synchro Rec programme, the programme
that starts first has priority and the second
programme starts recording only after the
first programme has finished.
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
Device” on page 20. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
1
Insert a recordable DVD.
See “1. Inserting a Disc” on page 23.
2
Press INPUT SELECT to select an input
source according to the connection
you made.
The front panel display changes as
follows:
3
Select the desired audio signal when
recording a bilingual programme to
the DVD-RWs/DVD-Rs (VR mode).
Press OPTIONS to select “Line Audio
Input,” and press ENTER. Then select
“Bilingual,” and press ENTER.
4
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 42.
5
Insert the source tape into the
connected equipment and set to
playback pause.
6
Press z REC.
This recorder starts recording.
7
Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.
If you connect a digital video camera with
a DV IN jack
See “DV Dubbing” on page 72 for an
explanation of how to record from the DV IN
jack.
z
Hint
You can adjust the settings for the recording picture
before recording. See “Adjusting the recording
picture quality and size” on page 48.
b
Notes
• When recording a video game image, the screen
may not be clear.
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be
recorded.
Recording from connected
equipment without a timer
First
programme
Second
programme
will be cut off
programme
position