Connecting to an audio device, Connecting to a pc, Connections – Sharp 430 User Manual
Page 10
10
English
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
✎
DIGITAL AUDIO OUT (OPTICAL)
x
When a Digital Audio System is connected to the
DIGITAL AUDIO OUT (OPTICAL)
jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theater. When the
source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver
and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theater. If
you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box /
STB satellite receiver directly to an amplifier or home theater.
✎
AUDIO OUT
: Connects to the audio input jacks on your amplifier/DVD home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the
AUDIO OUT
jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX-LINK
: Connector for service only.
Connecting to a PC
Using an HDMI/DVI cable
AUDIO OUT
DVI OUT
R-AUDIO-L
AUDIO IN
OPTICAL
R
W
Audio Cable (Not Supplied)
Digital Audio System
Amplifier /
DVD home theater
Red
White
Optical Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
[PC430-NA]BN68-02576A-03Eng.indb 10
2010-02-12 오후 4:45:35