Samsung SF-555P User Manual

Page 79

Advertising
background image

3.30

Stand-alone Fax

6. If you want to send to more than one location, repeat steps 4 and

5.

Note: You cannot use Group dial numbers for another fax
number.

Or,

To send to one location or when you complete the last fax number
setting, press Start/Enter.

7. The display asks you to enter a name. If you want to assign a

name to the transmission, enter the name. If not, skip this step.

For details on how to enter the name using the number keypad, see

page 3.19

.

8. Press Start/Enter. The display shows the current time and asks

you to enter the time when the fax is to be sent.

9. Enter the time by using the number keypad, then press

Start/Enter.

Enter the time in 24-hour format. For example, enter 2230 for
10:30 P.M. If you set a time earlier than the current time, the
document will be sent at that time on the following day.

10. The document will be scanned into memory. The display shows the

memory capacity and the number of pages being stored.

11. The machine returns to Standby mode and the display alternates

between messages to remind that you are in Standby mode and
that a Delayed Transmission is set.

Note: To cancel the operation reserved in memory, see

‘Cancelling a Scheduled Operation’ on

page 3.34

.

TIME(10:30)10:30

The current time

Advertising