Siemens CMTC1720 - Manual (Page 10)

Connection and Buttons
10
Siemens Building Technologies
Fire Safety & Security Products 10.2006
6 Connection and Buttons
6.1 Connection
A DC 12V input
B DVI-I(PC) input
C CVBS input
D S-VIDEO input
E AUDIO input
6.2 Buttons
1 Menu/Exit
Enters the OSD to adjust main menu. This button is also used to return to the previous
menu or submenu. This button is also used to exit the OSD main menu when the main
menu is displayed on the screen.
2 Source/Enter
This button is used to select the input source when the OSD is off. The input changes must
be made in the following order: S-VIDEO, CVBS, DVI/PC, CVBS….This button is also used
to confirm the current selection when the OSD is on.
3 ▼/- (Adjust down)
This button is used to scroll through the screen containing items to be adjusted, or to
decrease the value of the item to be adjusted.
4 ▲/+ (Adjust up)
This button is used to scroll through the screen containing items to be adjusted, or to
increase the value of the item to be adjusted.
5 Power Switch
Press once to turn the power on, and press again to turn the power off.
6 Power LED
If the LED indicator lamp is green, the unit is in normal operating mode. When DVI and PC
input source applications are being used, the LED indicator lamp will change to flash orange
when it is in power-saving mode.