Sony CDP-CE505 - Manual (Page 9)

Playing CDs Playing CDs
9
3 Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4
Replace discs in the compartments with new ones.
5
Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by pressing EX-CHANGE
• If the playback of the current disc ends, the player stops
playing. If the disc is played in 1␣ DISC Repeat Play mode
(see page 10), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page 10), tracks are
reshuffled on the current disc.
• In Programme Play mode (see page 11), only the tracks on
the current disc are played.
• Do not push the disc tray to close it in Step 5, as you may
damage the player.
Locating a Specific Disc
You can locate any disc before or while playing a disc.
DISC 1 – 5 DISC SKIP ·
• CDP-CE405/CE305/C350Z/C250Z/C661
• CDP-CE505/CDP-C450Z
>10 Number buttons
0/) ≠/± ·
Number buttons
>10
(
=/+
0/)
DISC CHECK*
*except for CDP-C450Z, CDP-C350Z and CDP-C250Z
To locate
The next disc
A specific disc directly
A disc while checking the
labels (except for CDP-
C450Z, CDP-C350Z and
CDP-C250Z)
A disc by scanning the first
track of each disc for 10
seconds (except for CDP-
C450Z, CDP-C350Z and
CDP-C250Z)
You can extend the playing time during scanning the
discs
Press DISC CHECK repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Press
DISC SKIP while playing a disc
DISC 1 – 5
DISC CHECK while the disc
tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press · to
start playing.
DISC CHECK before you start
playing while the disc tray is
closed. When you find the disc
you want, press · to start
playing.
Notes
• When you press DISC CHECK, the play mode
automatically changes to ALL DISCS Continuous Play
mode.
• When you’ve opened the disc tray by pressing
EX-CHANGE, you cannot use the DISC CHECK function.
• Even if you press DISC CHECK while “REPEAT” appears
in the display (see page 10), the player stops after scanning
all the discs once.
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons. You can also locate a
specific point in a track while playing a disc.
M.SCAN
Number buttons
(
=/+
0/)
(CDP-CE405/C350Z
only)
MUSIC SCAN >10 Number buttons
0/) ≠/± ·
>10