Sony CCTV Systems - Manual (Page 46)

50
TIME LAPSE VIDEO RECORDERS
Supplied accessories
AC power cord (1)
Operation manual (1)
Optional accessory
SVT-RM10 Remote Control Unit
RS-232C interface board SVT-RS1A
TLV parts kit TPK-887P
SVT-1000P
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) x 100 (H) x 349 (D) mm
(16
5 / 8 x 4 x 13 3 / 4 inches)
Mass: Approx. 5.5 kg (12 lb 2 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time: 3, 12, 24, 48 and 72 hours (with an E-180 tape)
Alarm recording speed: 3, 12-hour mode, NC* 1
Alarm recording duration: 20 s, 1 m, CC* 2
Fast forward/rewind time: Approx. 4 minutes (with an E-180 tape)
Video
Recording Playback system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
Input: 1.0 Vp-p, 75 Ω , unbalanced, sync negative (BNC type)
Output: 1.0 Vp-p, 75 Ω , unbalanced, sync negative (BNC type)
Horizontal resolution: Colour mode: More than 240 TV lines
Black & White mode: More than 320 TV lines
Signal-to-noise ratio: 43 dB
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: -7.8 dBu, 47 k
Ω
, unbalanced (phono jack)
Output: -7.8 dBu, 600 Ω , unbalanced (phono jack)
Microphone input: -60 dBu, 600 Ω (ø3.5 mm minijack)
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 k Ω (Low active)
Switch output: +5 V, 5.7 k Ω (Low active)
Tape end output: +5 V, 5.7 k Ω (Low active)
Warning output: +5 V, 5.7 k
Ω
(Low active)
External timer input: Low level
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
Notes: * 1 No change of recording speed
* 2 Stays an alarm for as long as the alarm input remains active.
0 dBu=0.775 Vrms
•Adaptive Picture Control (APC) delivers optimum
picture quality to the recording image
•A tape recorded in the 3-hour mode can be played
back by any VHS VCR
•Audio recording and playback are possible in 3, 12 and
24-hour modes
•Built-in time and date generator allows time and date
information to be displayed along with the Alarm count
and Recording/Playback speed
•Various recording modes such as Auto Repeat Recording,
Timer Recording and Alarm Recording for versatile situations
•By using alarm recall and scan functions, pictures
recorded during alarm mode can be easily checked
•Holiday setting function
•Daylight Saving Time setting function
•Quick recording check function
•Field-by-field picture playback capability
•External timer input capability
•On-screen display permits easy-to-follow operation
•Auto head cleaning function
•Tape before-end signal output capability
•Warning signal output capability
•Buzzer setting function
•Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5 mm mini jack
•4 different time lapse recording/playback modes are
available in addition to the standard mode (3 hours
time mode) with a normal 180-minute tape
Note: In time lapse modes, it is possible to additionally record three hours longer than the original modes.
Time Lapse Videocassette Recorder
SVT-1000P
Specifications
TIME MODE (h) 3 12 24 48 72
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5
Rear Panel