Samsung SHR-1040K - Manual (Page 47)

SHR-1040/1040K USER’S MANUAL
English 6-9
(1) TIMER: Set the Timer to ‘On’ to enable timer recording. [ON/OFF]
(2) DAY: Set the day of the week to record data.
[MON, TUE, WED, THU, FRI, SAT, DAILY, SUN]
(3) START & END: Set the start and ending time of recording. [00:00~23:59]
(4) FIELD RATE: Set the number of fields to record per second.
[1/2.5/3.75/7.5/15/30]
8
Timer Record Setup
- Motion is detected only from channels set to ‘On.’
The following screen shows motion recording after motion detection. A motion is deteced in the
Channel 1. The ‘M’ mark before the title of each channel indicates that a motion is
detected.
[ON/OFF]
SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 5-9