Sony Ericsson cordless 260 - Manual (Page 62)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Personalizing the base station 61
To adjust the ring volume with the handset:
Route: BaseStation » Settings » Volume » Ring
1. Select Ring and press Y E S .
The current ring volume setting is displayed (0 is the quietest level and 6 is
the loudest level.
2. Press the U P or D OW N key once, or more, to turn the volume up or down.
You can now also use the VO L U M E U P or VO L U M E D OW N key on the
handset to change the volume. Each time you press VO L U M E U P or
VO L U M E D OW N , you hear the ring at the new volume.
3. Press Y E S to confirm.
The base station ring volume level has now been changed.
When the base station receives an external call, all handsets ring. The base sta-
tion is pre-set so that all handsets ring at the same time. However, you can also
set the order in which the handsets ring.
Setting the ringing order
Using a handset, you can program the order in which the handsets ring.
To change the ringing order:
Route: BaseStation » Settings » Basic » RingOrder » Priority
1. Select Basic and press Y E S .
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press Y E S .
3. Select Priority and press YE S .
The current ringing order is displayed.
4. Press U P or D OW N to select one of the following options:
• One means only handset 1.
• One, Rest means first handset 1, then all handsets.
• One, Two.. means first handset 1, then 2, then 3, etc.
• All means all the handsets at the same time (default).
5. Press Y E S to confirm.
The ringing order has now been stored.
If the handset that should ring first has been switched off, the next handset
rings instead.
RINGING ORDER