Sprint Nextel SP-809 - Manual (Page 33)

33
Remote Operation
Remote Commands
Press: To:
0 Hear TAD On/Off status.
1 Play all messages. If no message is recorded, the TAD
says “No messages.”
2 Play new messages. If no new message is recorded,
the TAD says, “No new messages.”
3 3 Delete all played messages.
5 Stop message playback or recording.
7 Play current announcement.
8 Hear date and time setting.
9 Hear TAD ring selection and remote access code set-
tings.
# Record a memo. When you finish, press 5.
0 Set the TAD to not answer calls: The TAD says “The
machine is off” and beeps twice.
Set the TAD to answer calls: The TAD answers after
10 rings and says “The machine is off” and beeps
twice. Press
0. The TAD says “The machine is on”
and beeps twice.
7 Record new announcement. After the TAD beeps,
speak your message. When you finish, press 5. The
TAD plays your new announcement and beeps twice.
8, then
follow voice
prompts
Set date and time.
9, then
follow voice
prompts
Change ring selection and remote access code.
43-5805.fm Page 33 Wednesday, August 18, 1999 1:22 PM