SBC comm Windows 95/98/Me/2000 52609x02 - Manual (Page 25)

Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 24
©2001 SBC Advanced Solutions, Inc. All rights reserved.
APPENDIX B
I want to uninstall/reinstall the Kingston® Adapter. What do I do?
Uninstalling (and reinstalling) the Kingston® Adapter in Windows® 95/98
1. Select Start -> Settings -> Control Panel. Double-click the System icon and choose the
Device Manager tab.
2. Open the Network Adapters section (click the Plus sign).
3. If you don’t see the device under Network Adapters, look for a “PCI Ethernet Controller”
in Other Devices. See picture below.
4. Highlight the PCI Ethernet Controller, or Kingston® KNE-PC2 (laptop), or KNE110, or
KNE111 (desktop) adapter and click Remove.
• If you don’t see Kingston® at all in the Device Manager, the card is probably not seated
correctly. Follow the steps below.
5. Shut down the desktop or laptop. Turn OFF and unplug the computer and any peripheral
devices.