Sherwood DS-801 - Manual (Page 7)

7
ENGLISH
FLUORESCENT DISPLAY
TAPE COUNTER DISPLAY RECORD INDICATOR
TAPE DETECTION INDICATOR TAPE DIRECTION DISPLAY
DOLBY B NR INDICATOR REVERSE MODE DISPLAY
LEVEL METER DISPLAY CD SYNCHRO RECORDING INDICATOR
WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R
This unit can be remotely controlled with Sherwood system receiver RX-801R.
• To listen to a tape by using the system remote control unit of RX-801R, first connect SYSTEM CONNECTOR jack
of this unit to that of Sherwood system receiver RX-801R.
• With the system remote control unit of RX-801R, you can use additional functions.
POWER(ON/STANDBY) BUTTON
• Press this button to turn the power on and press
again to enter the standby mode.
• In standby mode, this unit is not disconnected from
the AC mains and a small amount of current is
retained for operation readiness.
• For system operation, connect this unit to Sherwood
system receiver RX-801R as illustrated in the
connecting diagram in the operating instructions of
RX-801R, then this unit is turned on or off
depending on the power operation on RX-801R.
TAPE TRAY
Load a tape with its exposed tape backwards.
OPEN/CLOSE( ) BUTTON
Press this button to open or close the tape tray.
REVERSE PLAY( ) BUTTON
Press this button to play back the back side of the tape.
FORWARD PLAY( ) BUTTON
Press this button to play back the front side of the tape.
STOP( ) BUTTON
Press this button to stop the tape.
REWIND( ) BUTTON
Press this button to rewind the tape rapidly during
forward playback or to advance during reverse playback.
FAST FORWARD( ) BUTTON
Press this button to advance the tape rapidly during
forward playback or to rewind during reverse playback.
RECORD/RECORD MUTE( ) BUTTON
Press this button to record or to make a 4 second
blank space between the programs for automatic
music search, etc.
DOLBY NR BUTTON
Press this button to select the Dolby B NR system
when playing back or recording.
COUNTER RESET BUTTON
Press this button to reset the counter to “0000”.
CD SYNCHRO RECORDING BUTTON
Press this button to use the CD SYNCHRO
RECORDING function.
REVERSE MODE BUTTON
Press this button to select the desired reverse mode.
H G F E C B
A D