SEH Computertechnik IC146-ETHER-HP-FL - Manual (Page 13)

Hardware Installation Guide 13
Mounting the Print Server
The print server is a so-called slot card that is simply inserted into the foreseen
slot. The print server slot is usually located next to, or above the printer's
Centronics interface.
Insert the print server
Proceed as follows:
1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the data cable connecting the printer to the computer.
4. Remove the screws from the interface cover.
5. Remove the metal cover.
6. Insert the print server board into the slot until the board locks into the
receptacle.
7. Fasten the print server board screws.
Connect the print server
Proceed as follows:
1. Connect the network cable to the print server.
2. Connect the printer's power cord to the printer.
3. Turn the printer on.
4. Press the status button of the print server in order to print out a status
page.