Star Micronics TCP2000 Series - Manual (Page 4)

2
During the operation:
1) Do not use any other card but specified by Star Micronics Co., Ltd. It
may cause malfunction, failure, etc.
2) Do not use wet or oily stained card. Do not touch card with wet or
stained hand. It may cause malfunction, failure, etc. If the card gets
stained, please perform cleaning of the card and the unit. (For the clean-
ing of the unit, refer to Chapter 6. CLEANING.)
3) Keep the card away from magnetic source, such as magnet, speaker, TV,
etc. The data on the card may be damaged or erased.
4) Do not leave the card in high temperatures, such as inside of the car. It
may cause the bend of card, or erase the printed data on the card.
5) Do not insert bent card into the TCP100/2000 reader/writer. It may cause
the card jamming.
6) Do not insert the card in the unspecified direction. It may cause mal-
function.
<Specified Direction>
[TCP110] [TCP192] [TCP2000]
7) Do not insert any other object into the TCP100/2000 reader/writer but
the specified card. It may cause failure, electric shock, etc.
8) Do not interrupt the card feeding procedure (inserting, discharging). It
may cause malfunction, or injury.
9) Do not turn off the power during the card processing. It may cause the
damage, or erase the data on the card.