Star Micronics TCP2000 Series - Manual (Page 6)

4
OUTLINE
The TCP100/2000 series is a reading/writing device for specified IC card or
reading device for ISO magnetic stripe type card.
It also has print/erase capability to human readable area on the surface of the
card. This series is compatible with most host computers and various P.O.S.
systems.
(TCP2000 series does not support for IC card.)
The main features of the TCP100/2000 series are as follows:
1. Reads/writes data from/to a magnetic stripe on the card (depends
on the model type).
2. Reads/writes data from/to IC chip on the card (TCP100 series only:
depends on the model type).
3. Prints/erases characters/graphics to/from a human readable area.
4. Serial interface of RS-232C(housed unit), or CMOS(mechanism
unit).
5. The human readable area of the card may be re-used up to approx.
500 times under the proper condition.
Model Name
TCP110ZD Magnetic stripe read/write
3 lines human readable printing (upper part of a card)
Housed unit
TCP192TD Specified IC card read/write
3 lines human readable printing (lower part of a card)
Housed unit
TCP2000ZD Magnetic stripe read/write
Human readable wide printing on PET card
Housed unit
2