Shoprider START 8 GK9 - Manual (Page 7)

7/8/2009SE 7
ADJUSTMENTS
Tiller Angle Adjustment (Fig 2)
At the base of the tiller is a round knob.
Turn the knob counterclockwise to loosen
the tiller and select the desired tiller angle.
Turn the knob clockwise to securely lock the tiller into place.
NOTE: For Safety, this lock is
designed to break away if the
scooter is driven when locked.
Folding the Tiller (Fig 3)
Fold down the tiller by loosening the tiller angle
adjustment knob located at the base of the tiller (fig
2). Tighten knob to lock tiller in place. You may lock
the tiller assembly into place so that it doesn’t swing
from side to side by lifting the red tiller lock lever up
(fig 2) and to the right. (Do not forget to unlock the
tiller lever lock when driving scooter. For safety
reasons, this lock is designed to breakaway if
scooter is driven while locked)
Seat Removal (Fig 4)
Fold down the back of the seat. Lift the
swivel seat release handle up to lift the
seat up and off the seat post.
Tiller Angle
Adjustment
Figure 3
Figure 2
Figure 4
Fold down