Saris The T-Rax Sport 4 bike - Manual (Page 2)

MOUNT CARRIER TO VEHICLE CONTINUED:
Place lanyard
ring around
sleeve. Insert
final bolt into
receiver base,
through sleeve
and out through
the other side
of the receiver
base.
Attach 3/8” washer and nut.
Tighten with a 9/16” wrench. Attach bolt and securely tighten all
bolts with two 3/4” wrenches.
7
8 9
5 6
Attach nut loosely-do not
fully tighten until all nuts
and bolts are loosely
placed. Attach 1/2”washer.
2
Insert rack into the receiver base
and insert long bolt into receiver
and rack as shown. Insert pin into
bottom hole as
shown.
(Note: Pin can be removed when
rack is empty to fold rack down.
Do not drive with rack in down
position) Secure with clip.
3 4