Siemens CXT65 - Manual (Page 91)

©
Sieme
ns
AG
2003, I:\Mobil
\R65\C
X
65
_Ul
ysses\en\_von_itl\f
ug\CX65_
Security.fm
90
VAR Langua
ge: English; VA
R issue
da
te
: 1
8-Fe
bruar
-2004
left page (90) of CX 65 Ulysses FUG en, A31008-H7100-A1-1-7619 (04.03.2004, 14:15)
Setup
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Direct call
(Phone-code protected)
Only one phone number can be
dialled(see also p. 28).
Only
‚
b
(PIN 2 or phone code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support
PIN 2 input, the whole Phonebook
can be protected with the phone
code.
This SIM only b
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Codes
Description, see p. 17:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
#
Hold down .