Setting a large original – Sharp AL-1340 User Manual
Page 21
19
3
Making copies
NORMAL COPYING
6
Set the number of copies using the two copy quantity (
,
) keys.
●
Press the clear (
) key to clear an entry if a mistake is made.
●
A single copy can be made with the initial setting, i.e., when “0” is displayed.
●
Press the right copy quantity key to set the unit
digit from 0 to 9. This key will not change the
tens digit.
●
Press the left copy quantity key to set the tens
digit from 1 to 9.
7
Press the print (
) key.
●
To display the number of copies made in a continuous run, press the left
copy quantity key.
●
To stop copying in the middle of a run, press the clear (
) key. Copying will
stop and the number in the display will be reset to “0”.
Setting a large original
The original cover can be removed to allow copying of bulky objects.
1
Simply lift the original cover straight up.
2
To reattach the original cover, reverse the above procedure.
ZOOM
Tens digit
Unit digit