Useful feat ures – Sharp IM-MT899H User Manual
Page 37
02/2/21 IMMT899H_E_4.fm
E-28
IM-MT899H
ENGLISH
Useful Feat
ures
-A
d
v
anc
e
d Rec
o
rd
ing-
„
Recording tracks as a single track
You can record several pieces of music as a single track
by disabling the auto marker function.
z
Complete the operation within 25 seconds whilst
selecting the menus.
z
If you press the CLEAR button during the operation,
the previous display appears.
z
To cancel the operation, move the M button toward .
Note:
When making digital recordings using a CD player or an
MiniDisc player, track numbers will be created automati-
cally regardless of the setting of the auto marker function.
„
About track numbers
z
Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
z
The track numbers on the playback side may not match
the track numbers recorded on the MiniDisc.
z
When recording, if a programmed playback is performed
by the source or playback is performed by selecting tracks
manually, the MiniDisc track numbers may not be the
same as on the source.
z
Track numbers may not be created properly, depending on
the connected stereo system.
1
Whilst the recording or recording is paused,
press the M button.
The unit enters the menu select mode.
2
Move the M button toward
or
to select "M(MARK)"
and press it.
3
Move the M button toward
or
to select "A(AUTO)"
and press it.
1. Track numbers are created automatically during record-
ing via the analogue connection when a silence of 1 sec-
ond or more is detected (Auto marker function). A series
of tracks can be recorded as one by disabling the auto
marker function.
2. When recording from a CD or a MiniDisc using the digital
connection, track numbers will be created at the same
points as on the CD or MiniDisc (Synchro marker func-
tion).
First track Second track Third track
Track A Track B Track C
Playback
side
First track Second track Third track
Track A Track B Track C
Recording
side