Notes on the screen – Sony SGPT21 User Manual

Page 16

Advertising
background image

Notes on the Screen

Notes on handling the touch screen and LCD screen are explained here.

Notes on the touch screen

Your tablet device uses a capacitive touch screen. Tap the screen directly with your fingertip. Do not scratch it

or tap it with sharp objects such as a needle, pen, or fingernails. You cannot operate the touch screen with a

stylus.

If you tap the touch screen with gloved fingers, the touch screen may operate incorrectly or may not operate

at all.

Do not operate your tablet device with objects on the touch screen.

If the touch screen is touched by objects other than your fingertip, it may not react correctly.

Do not put the touch screen close to other electrical devices. Electrostatic discharges can make the touch

screen malfunction.

If there are water droplets on the touch screen, or if you touch it with wet fingertips, the touch screen may not

react correctly.

Do not put the touch screen close to water. The touch screen may malfunction in humid conditions or when

exposed to water.

The touch screen may not react correctly due to noise from the AC power cord (mains lead) during charging

the battery. Disconnect the AC power cord (mains lead), and operate your tablet device on the battery only.

Notes on the LCD screen

Do not leave the LCD screen facing the sun. Be sure to block direct sunlight when using your tablet device

near a window.

Using your tablet device in low temperature conditions may produce a residual image on the LCD screen.

This does not indicate a malfunction. The screen will return to normal when the tablet device returns to normal

temperature.

The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.

The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points

and/or bright points (red, blue, or green) on the LCD screen. This is a normal result of the manufacturing

process and does not indicate a malfunction.

The LCD screen is made of glass. If the glass is damaged (crack, etc.), do not touch the touch screen nor try

to repair it by yourself. Handle the LCD screen carefully as it is vulnerable to dropping or mechanical shock.

We cannot guarantee any damages caused by customers due to wrong handling.

Do not exert excessive pressure on the LCD screen lid with the lid closed as doing so may scratch or dirty

the LCD screen.

You may see a difference in color or brightness between upper and lower LCD screens. This is a normal

result of the manufacturing process and does not indicate a malfunction.

Advertising