Samsung Digimax A4 - Manual (Page 41)

41
Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI ( ) : Exposure will be calculated based on
an average of the available light in the
image area. However, the calculation
will be biased towards the centre of
the image area. This is suitable for
general use.
SPOT ( ) : Only the rectangular area in the centre
of the LCD monitor will be metered for
light. This is suitable when the subject
in the centre is exposed correctly, regardless of the back lighting.
The default metering mode is Multi pattern metering.
If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
INFORMATION
Effect
By using the camera’s digital processor, it is possible to add special effects to your images.
[ PROGRAM mode ]
[ PROGRAM mode ]
[ MOVIE CLIP mode ]
NORMAL : No effect is added to the image.
B & W
: Converts the image to black and white.
SEPIA : Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
2048
METERING
MULTI
SPOT
2272 NOR
2048
EFFECT
NORMAL
B & W
SEPIA NOR
2048
EFFECT
NORMAL
B & W
SEPIA
640
NOR