Sharp AQUOS BD-HP80U - Manual (Page 19)

Removing and replacing the
terminal cover
Before connecting the player to a TV, the AC adapter,
etc., remove the terminal cover on the bottom of the
player.
Remove the terminal cover on the bottom of the
player.
Make the necessary connections to the player
(pages 18–21, 23).
Replace the terminal cover.
Pass the cables through the center of the terminal
cover.
Replace the terminal cover so the cables pass through
the center of the cover.
1
2
3
•
•
Securing bracket for the HDMI cable
The terminal cover has a securing bracket to prevent
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
Remote control sensor setting
You can select the remote control sensor from “Front”
or “Top” depending on the orientation of the player and
the usage situation. In most cases, the selector switch
should be set to “Front”.
FRONT
TOP
17
Connection
Player setup orientation
b Bottom side of the player
b Bottom side of the player
Pass the cables through here.
b Bottom side of the player
Installation example
Securing bracket for the HDMI cable
b Back of the terminal cover
Selector switch for
Remote control sensor
Remote control sensor “Front”
Remote control sensor “Top”