SteelSeries ZXP 1000 - Manual (Page 7)

7
l
'
If you do not accept the terms, the Z Engine Software installation will be aborted and you
will not be able to take full advantage of all the features your ZXP 1000 has to offer.
4. In the "Choose installation directory" window, note the default directory of the Z Engine
Software. It will be installed to "C:\Program Files\Ideazon\ZEngine". If you need to locate
the installation files, they will be found in this directory.
To install the Z Engine Software in the default directory click Next. To install the Z Engine
Software in a directory of your own choosing, click Browse and choose a directory.
5. Click Install to begin the installation.
6. Installation of the Z Engine Software will now begin. The status bar indicates the
percentage of completion.
Note: The Z Engine requires that Microsoft .NET Framework 2.0 be installed on the
computer. The process includes the .NET Framework 2.0 installation for those who
don't have it installed already. The .NET Framework 2.0 is also freely availab e using the
Microsoft 'Windows Update feature.
7. Follow the instructions on your screen.
After installation is complete a green 'Z' tray tool icon will appear in your System Tray. You
can access the Z Engine Software in various ways including pressing the key labeled 'Z' on
the Gaming Keyboard , double-clicking the tray tool icon or via 'Start>Programs' in the Start
menu.
GAMING KEYBOARD IN DOS MODE
If your Gaming Keyboard is not working in DOS mode or in any selection windows you may
encounter when booting up your computer, you may need to enable USB Legacy support on
your Computer's BIOS. To enable USB support on your computer BIOS do the following:
The following instructions may vary slightly depending on your computer.
Reboot your computer and follow the boot up screen for instructions on how to enter the BIOS
settings screen. (You may need to press either the "delete", "F2" or "F10" keys).
In the BIOS settings screen, browse for a category called "Integrated Devices" or "Device
‘Options" or similar.
Browse for a sub category called "USB Emulation" or "USB Legacy Support" or similar.
Ensure that the "USB Emulation" or "USB Legacy Support" or similar is "Enabled" or "On".
Save your settings and exit.