Samsung HomePAD HP2777AT - Manual (Page 26)

26
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small level adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator.
If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, turn the nut ( ① ) clockwise( ) until the lower end of the bolt, then tighten the
bolt again with the wrench ( ➂ ) to fix the nut( ① ).
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
2) Please adjust the height difference between the doors turning the bolt ( ➁ ) clockwise( ) or counter clockwise
( ).
When you turn clockwise ( ), the door goes up.
➂ WRENCH
Adjustment location
➀ NUT
➁ BOLT
Adjustment location
➂ WRENCH
➀ NUT
➁ BOLT
➀ NUT
➁ BOLT
➂ WRENCH
➂ WRENCH ➂ WRENCH
➁ BOLT ➁ BOLT
Please open the doors and adjust the doors as follows:
1) Release the nut ( ① ) on the lower hinge until the upper end of the bolt ( ➁ ).
When you release the nut( ① ), use enclosed hex wrench ( ➂ ) to turn the bolt( ➁ ) a little counter-
clockwise. Loosen the nut( ① ) with your finger.
➁ BOLT
➂ WRENCH
➀ NUT
NOTE
NOTE
NOTE