Usb 1.1 and 2.0 – Superior MD400G User Manual
Page 22
12
Overview
The MD400 is plugged in using the supplied extension cable or directly into a socket on the hub. The
hub configuration allows extended cable length so you can locate the MD400 for optimal reception.
Note:
Some powered hubs may not provide adequate power. Your hub must be capable of
supporting high power USB devices and must not be overloaded by the connection of too
many such devices. Other high power devices include USB-powered disk drives, scanners
and rechargeable music players. If you are experiencing problems, unplug these other devices
to test if your hub is overloaded.
USB 1.1 and 2.0
Your MD400 is a USB 2.0 product, however it should work in the majority of USB 1.1 ports, but
data throughput may be compromised.
Note:
Sony Ericsson does not guarantee operation in a USB1.1 port
As a guide, USB 1.1 ports are likely to be found in these cases:
•
All PCs manufactured before 2002
•
All PCs originally sold with Windows 2000 installed
•
Current PCs where the USB port is provided only for use with keyboard and mouse.
USB 2.0 ports can be identified in the Device Manager. Select Start
Control Panel
System,
Hardware Tab, Device Manager.
The presence of an Enhanced Host Controller indicates USB 2.0 support: