Silvercrest KH 2430 - Manual (Page 11)

13
Setting up and connecting
USB Record Player KH 2430
GB
Before initial use
The following transportation protections are attached to the device:
Plastic band for holding down the pick-up arm –
Transport screw –
9 for securing the turntable
Protective cover for the needle –
Styrofoam blocks –
Information sheet for the turntable
–
Remove all packaging material and all transport protection from the device. ■
Release the turntable's transport protection by tightening the ■ transport screw 9 .
Electrical connection
Observe the following electrical connection for safe and failure free operation of
the device:
Before connecting the device compare the connection data (voltage and ■
frequency) with that on the rating plate of your electric supply. This data must
agree in order to avoid damaging the device.
Make sure that the power cable is not damaged and is not laying over hot ■
surfaces and/or sharp edges.
The connection cable must not be stretched tight. ■
Connection to an external amplifi er
Connect both cinch plugs of the LINE-OUT connection cable ‹
16 to the AUX
input of an external amplifi er. For this follow the operating instructions for the
external amplifi er.