SoundCraft UREI 1601S - Manual (Page 29)

29
X-F MONITOR
When the [MASTER/CUE SELECT] is set to CUE the [X-F MONITOR] control adjusts the relative mix balance between CH1 and
CH2. When fully over to the LEFT position only CH1 sound will be audible. As the control is moved to the RIGHT CH2 sound will be
gradually introduced until, at half-way, CH1 and CH2 sound will be equal. As the control is moved to the RIGHT from the centre
position the CH1 sound will gradually reduce until at full RIGHT only CH2 sound will be audible.
When the [MASTER/CUE SELECT] is set to MASTER the [X-F MONITOR] control has no function. The signal from main mix will be
routed to the headphones. Note: The headphone monitor section has built in peak limiting to protect your hearing from unwanted
distortion. This limiter dynamically alters the DSP gain before the DACs to ensure no output clipping occurs.
Note: the x-f monitor is also used to select the sampling source: see page 32, Selecting The Sampling Source.