Schumacher PST-900X User Manual

Page 13

Advertising
background image

10

GLOSSARY

6.

What is a SLI battery?
these initials stand for starting, Lighting and Ignition, which are the three basic

functions which a battery has to perform on all normal vehicles. Batteries

given this description, will have been specifically designed for service on cars

and trucks within a voltage controlled electrical system. Most Maintenance

Free Batteries are sLI, otherwise known as Flooded, regular or standard

Batteries.
What is a GEL battery?
a gel battery is a lead-acid electric storage battery that:

is sealed using special pressure valves and should never be opened.

is completely maintenance-free.*

uses thixotropic gelled electrolyte.

uses a recombination reaction to prevent the escape of hydrogen and

oxygen gases normally lost in a flooded lead-acid battery (particularly in

deep cycle applications).
is non-spillable, and therefore can be operated in virtually any position.

However, upside-down installation is not recommended.

*Connections must be retorqued and the batteries should be cleaned

periodically.
What is an AGM battery?
an aGM battery is an absorbed glass mat lead-acid electric storage battery

that:

is sealed using special pressure valves and should never be opened.

is completely maintenance-free.*

has all of its electrolyte absorbed in separators consisting of a sponge-

like mass of matted glass fibers.
uses a recombination reaction to prevent the escape of hydrogen and

oxygen gases normally lost in a flooded lead-acid battery (particularly in

deep cycle applications).
is non-spillable, and therefore can be operated in virtually any position.

However, upside-down installation is not recommended.

*Connections must be retorqued and the batteries should be cleaned

periodically.
What is a VRLA battery?
Valve regulated Lead acid Battery – this type of battery is sealed

Maintenance Free with a “Bunce” Valve or Valves in the top of them that opens

when a preset pressure is realized inside the battery and let’s the excess gas

pressure out. then the valve resets itself.
What is STATE OF HEALTH?
It means how much battery capacity is left (%) compared with the marked

original battery capacity.
What is STATE OF CHARGE?
It means to what percent the battery is actually charged.

Advertising