Sharp AL-1610 - Manual (Page 6)

4
GETTING ST
AR
TED
PART NAMES AND FUNCTIONS
Overall layout
Part names and functions
q
Platen cover
Place the original on the original table and close the
platen cover before copying starts.
w
Original table
Place the document to be copied here.
e
Handles
Use to move the copier.
r Power switch
Press to turn copier power on and off.
t Operation panel
All copier controls are located here for easy operation.
y
Paper output tray
Finished copies are deposited in the paper output tray.
u
Front cover
Open to remove misfeeds and for copier servicing.
i
Paper tray
Holds 250 sheets of copy paper.
o
Side cover
Open to remove misfeeds and to service the copier.
! 0
Side cover handle
Lift and pull to open the side cover.
! 1
Bypass tray guides
Adjust to the width of the copy paper.
! 2
Bypass tray
Special papers (including transparency film) and copy
paper can be fed from the bypass tray.
! 3
Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x 14"
and 11" x 17".
! 4
Charger cleaner
Use to clean the transfer charger.
q
w
e
r
t
y
u
i
!0
o
e
!2
!1
!3
!4
GETTING ST
AR
TED