Troubleshooting (continued) – Sony SLV-EZ77AS User Manual

Page 66

Advertising
background image

66

Additional Information

Troubleshooting (continued)

Recor

ding

T

imer r

ecording

Symptom

No TV programmes
appear on the TV screen.

TV reception is poor.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press z REC.

Nothing happens
when you press z REC.

The timer does not operate.

The SYNCHRO REC button
turns off while recording or
does not go back to recording
standby mode.

The Synchronised Recording
function does not work.

The programme recorded with
the Synchronised Recording
function is incomplete.

Remedy

• Make sure the TV is set to the video channel. If you are

using a monitor, set it to video input.

• Select the correct source with the INPUT SELECT or

PROG +/– buttons. Select a programme position when
recording TV programmes; select “L1” or “L2” (or
“L3”: SLV-EZ77AS/EZ77NZ only) when recording
from other equipment.

• Adjust the TV aerial.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings are past the current

time.

• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the

mains for more than eight hours. Reset the clock and
timer.

• The tape has reached its end. Insert a new tape and

press SYNCHRO REC again.

• The connected equipment was not turned off.

Turn off the connected equipment and press
SYNCHRO REC again.

• There was a power failure. Press SYNCHRO REC

again.

• If the settings for timer recordings and Synchronised

Recording overlap, the programme that starts first has
priority and the second programme starts recording
only after the first programme has finished.

• There was a power failure. Press SYNCHRO REC

again.

Synchr

onised Recording

Advertising
This manual is related to the following products: