Sony STR-DE545 - Manual (Page 25)

25
Location of Parts and Basic Amplifier Operations
qf TONE button
Press to turn the tone effect on or off. The TONE
indicator lights up while the tone effect is turned on.
Note that if you have adjusted the tone using the
cursor buttons and jog dial, the adjusted tone will be
produced whenever you turn on the tone effect.
z When you want to listen to an analog source without any
digital processing
Do the following to bypass the sound field, tone, and bass
booster circuits.
1 Press 2CH.
2 Press BASS BOOST to turn off the BASS BOOST indicator.
3 Press TONE to turn off the TONE indicator.
The result will be a sound that is highly faithful to the program
source.
qg The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page
37.
SHIFT button
Selects a memory page for preset stations.
MEMORY button
Press to memorize a preset station.
qh The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page
37.
PRESET TUNING +/– buttons
Scan all preset stations.
TUNING +/– buttons
Scan all the available radio stations.
FM/AM button
Selects the FM or AM band.
FM MODE button
If “STEREO” flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
qj LEVEL button
Press to activate the speaker level parameters (page
34). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, rear balance, etc.).
qk SUR button
Press to activate the surround parameters (page 33).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
ql BASS/TREBLE button
Press this button to adjust the tone (page 35).
w; Cursor buttons ( / )
Press to select various speaker level, surround, and
bass/treble parameters (etc.).
wa Jog dial
Turn to adjust the selected speaker level, surround,
and bass/treble parameters (etc.).