Sony KV-28FX65 U - Manual (Page 25)

23
Smartlink is a direct link between your TV and VCR.
For Smartlink you need:
* A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic.
* A fully-wired 21-pin scart cable to connect your VCR to scart 2 / connector.
The features of Smartlink are:
* Tuning information such as the channel overview are downloaded from the TV set to the VCR.
* With NexTView you can programme your VCR easily.
* Direct TV recording: while watching TV you need to press just one button on the VCR to record this programme.
For more information on Smartlink please refer to your VCR instruction manual.
Smartlink
2 s 2
Specifications
TV system
I
Colour system
PAL,
SECAM, NTSC 3.58, 4.43 (only Video In)
Channel coverage
B21...B69
Picture tube
KV-28FX65: FD Trinitron WIDE, Approx. 71cm (28 inches)
KV-32FX65: FD Trinitron WIDE, Approx. 82cm (32 inches)
Rear Terminals
/ 21-pin Euro connector (CENELEC standard) including audio/
video input, RGB input, TV audio/video output.
/ 21-pin Euro connector (CENELEC standard) including audio/
video input, S-video input, Selectable audio/video output.
/ 21-pin Euro connector (CENELEC standard) including audio/
video input, S-video input, Monitor audio/video output.
L/G/S/I RCA connectors, variable output for audio signals.
R/D/D/D
RF In
Front Terminals
Video input -phono jacks
Audio inputs - phono jacks
S video input - 4 pin DIN
Headphones jack - minijack stereo
1 1
2 s 2
3 s 3
4
4
s 4
Sound output
Left/Right: 2x20W (Music Power)
2x10W (RMS)
Sub woofer: 30W (Music Power)
15W (RMS)
Power consumption
KV-28FX65: 170W
KV-32FX65: 122W
Dimensions (wxhxd)
KV-28FX65: Approx. 796x518x522mm
KV-32FX65: Approx. 883x567x562mm
Weight
KV-28FX65: Approx. 48kg
KV-32FX65: Approx. 64kg
Accessories supplied
RM-887 remote control (1)
IEC designated size AA batteries (2)
Optional accessory
TV Stand:
KV-28FX65: SU-28FX2
KV-32FX65: SU-32FX2
Other features
Flat display Trinitron tube, noise reduction, graphic equaliser,
2000 page TEXT memory, personal ID, sleep timer,
NexTView.
Design and specifications are subject to change without
notice.
Additional Information
* If the picture or sound is distorted, move the VCR away from the TV set.
* When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR.
* For information on how to select the output signal of the scart 2 / , see page 16.
* When connecting external hi-fi equipment, you can adjust the volume level by adjusting the headphones setting in the
sound menu - please refer to the ‘Adjusting the picture and sound’ section of this manual.
Additional information when connecting equipment
2 s 2